CMG Granulators at Plastics Recycling Technology 2024

CMG Granulators will take part at the event Plastics Recycling Technology 2024 that will take place from 23 ^rd to 24 ^th of October in Vienna.

Responding to increasing pressure to recycle more plastics and to add value to reclaimed materials, the plastics industry is changing fast, and this event has everything you need to keep apace.

Innovation & Performance: New cutting chamber design

CMG Granulators is introducing a brand new cutting chamber design for its Evoluzione series granulators. The new rotor configuration allows the rotor blades to cut the plastic feedstock perpendicularly against the bed blades, obtaining the highest degree of cutting penetration and precision.

The rotor blades are mounted on the edge of the rotor holding modules and not on a holding block. Not only this feature is beneficial, as the inclination of the rotor blades is very high, but it also allows easy and quick servicing/replacement of the blades, with comfortable access from the front of the machine.

The rotation of the rotor does not produce the very detrimental “drag” effect, meaning the mass of material being ground in the cutting chamber does not rotate with the rotor producing lots of dust and fine particles, that will all become waste through the washing line. The production of fine particles is reduced to few percentage points, versus a common 15% or more from conventional granulators.

FIND OUT MORE

Continuous Improvement & New Developments: New Evacuation & Dedusting Systems

Along with its state-of-the-art granulator design, CMG Granulators is introducing a brand-new development: the new range of evacuation, dedusting and powder containment system solutions.

The unit is the largest of the category and can evacuate, convey, dedust an amount of regrind of up to 7.000 kg/h.

The entire new range of the so called Regrind Evac Systems, starts at a capacity of 200 kg/h and, through a selection of 10 different sizes, reaches the impressive capacity of 7.000 kg/h.

FIND OUT MORE

Customer Service

With Headquarters, Production Site and Technical Center in Italy, and the largest distribution network in the plastics industry, CMG is active all over the world with localized technical service, spare parts and sales centers. Find the nearest CMG service center at the following link: https://www.cmg-granulators.com/en/contacts