CMG Granulators at Plastics Recycling Show Middle East & Africa 2023
22 August 2023
CMG Granulators at MSV, ALLpacK and Fakuma 2023
4 October 2023
CMG Granulators will take part at Plastics Recycling Technology 2023 from 10 to 12 October in Vienna.
Plastics Recycling Technology 2023 examines the latest technologies for increasing the volume of plastics being recycled and explores ways to improve the quality of reclaimed materials so that they can be used in higher-value applications.
On October 11 at 14:50 Giorgio Santella, Managing Director of CMG Granulators, will talk about the energy efficient high-capacity recyclers grade plastics granulators.
Supergranulators for post-consumer recycling
With the new Evoluzione series, CMG presents the EV916 and EV616 models, solutions suitable for the most critical operating conditions, for wet or dry granulation, which require high performance characteristics such as granulation capacity from 2,000 to over 5,000 kg/h, versatility, efficiency and sustainability.
Innovation & Performance: New cutting chamber design
CMG is introducing a brand new cutting chamber design for its Evoluzione series granulators. The new rotor configuration allows the rotor blades to cut the plastic feedstock perpendicularly against the bed blades, obtaining the highest degree of cutting penetration and precision.
The rotor blades are mounted on the edge of the rotor holding modules and not on a holding block. Not only this feature is beneficial, as the inclination of the rotor blades is very high, but it also allows easy and quick servicing/replacement of the blades, with comfortable access from the front of the machine.
The rotation of the rotor does not produce the very detrimental “drag” effect, meaning the mass of material being ground in the cutting chamber does not rotate with the rotor producing lots of dust and fine particles, that will all become waste through the washing line. The production of fine particles is reduced to few percentage points, versus a common 15% or more from conventional granulators.
Customer Service
With Headquarters, Production Site and Technical Center in Italy, and the largest distribution network in the plastics industry, CMG is active all over the world with localized technical service, spare parts and sales centers. Find the nearest CMG service center at the following link: https://www.cmg-granulators.com/en/contacts